Using the TSX-1620 Hub View
2-20 Managing the Device
Figure 2-10. The Console Config Window
The Hardware field at the top of the window displays your serial port’s hardware
type. To configure your serial port:
1. Select your serial port’s speed by clicking on the menu button in the Speed
field to display the Speed selection menu. Select the desired port speed from
the menu. The menu will disappear, and your selection will be display ed in the
menu button. Available speed selections are 1200, 2400, 4800, 9600, 19200,
or 38400 bits per second.
2. Select the number of bits in a character for the port by clicking on the menu
button in the Bits Per Char field to display the Bits Per Character selection
menu. Select the desired number of bits per character (7 or 8) from the menu.
The menu will disappear, and your selection will be displayed in the menu
button.
3. Select the number of stop bits (one, one and a half, or two) for the port by
clicking on the menu button in the Stop Bits field to display the Stop Bits
selection menu. Select the desired number of stop bits from the menu. The
menu will disappear, and your selection will be displayed in the menu button.
4. Select the parity of the port by clicking on the menu button in the Parity field
to display the Parity selection menu. Select the desired sense of parity (none,
odd, even, mark, or space) from the menu. The menu will disappear, and your
selection will be displayed in the menu button.