Using the TSX-1620 Bridge View
3-20 The Filtering Database Window
Figure 3-8. Changing the Filtering Database Ageing Time
Changing Forwarding and Static Database EntriesThe only entries that can be changed or deleted in the Filtering Database are static
entries. If the entry you wish to change or delete is a forwarding entry, you must
add it to the Static Table. The Static Table (Figure 3-9) is used to change a
forwarding entry to a static or permanent entry, or make changes to existing static
entries. To open the Static Table window:
1. Open the Filtering Database window by clicking on the Front Panel
button; drag down to Filtering Database to display the Filtering Database
window.
2. If the Filtering Database window displays Forwarding entries, highlight the
entry you want to change and click on the Add to Static Table button.
or
If the Filtering Database window displays Static entries, highlight an entry and
click on the Change button.
NOTE
It is also possible to open the Static Table in either case without highlighting an entry, by
clicking on the Add To Static Table button. The static address field will appear blank.
Enter the MAC address that you want to add to the Static Table.
2. Highlight and edit the Ageing Time
(in seconds), and then click mouse
button 1 on the Apply button.
or
3. Use mouse button 1 to drag the slide
bar, then click Apply.
or
4. Click mouse button 1 next to the slide
to increment the time in 100 second
jumps, then click Apply.