2-1

Chapter 2

Using the TSX-1620 Hub View
Navigating through the Hub View, monitoring hub performance; managing the hub
The heart of the SPECTRUM Portable Management Application (SPMA) for the
TSX-1620 is the Hub View, a graphical interface that gives you access to many of
the functions that provide control over the TSX-1620.

Using the Hub View

There are two ways to open the Hub View: if you are working within a network
management system, you can select the
Hub View
option from the icon menu;
speciļ¬c directions for creating a TSX-1620 icon and accessing the icon menu can
be found in the appropriate
Installing and Using SPECTRUM for...
guide. If you
are running the TSX-1620 module in a stand-alone mode, type the following at the
command line:
spmarun tsxmod <IP address> <community name>
The community name you use to start the module must have at least
Read
access;
for full management functionality, you should use a community name that
provides
Read/Write
or
Superuser
access. For more information on community
names, consult the appropriate
Installing and Using SPECTRUM for...
guide,
and/or the
Community Names
chapter in the
SPMA Tools Guide
.