Using the TSX-1620 Hub View
2-16 Managing the Device
5. If you wish to use your new polling interval settings as the default values that
SPMA will use for each TSX-1620 you are managing, use mouse button 1 to
select the Save As Defaults option.
6. If you wish to replace existing values with the current set of default values, use
mouse button 1 to select the Use Defaults option.
7. Click mouse button 1 on once your changes are complete.
Changes take effect after the current polling cycle is complete.
You can set the update intervals for the following:
Contact Status
This polling interval controls how often the TSX-1620 is “pinged” to check
SPMA’s ability to maintain a connection with the device.
Device General Status
This polling interval controls how often the Hub View Front Panel Information —
such as Uptime, Device Name, and so forth — and some port status information
is updated.
Device Configuration
This polling interval controls how often a survey is conducted of the TSX-1620’s
physical configuration; information from this poll would change the Hub View to
reflect any changes in the device’s physical configuration.
Port Operational State
This polling interval controls the update of the information displayed in the Port
Status boxes for each of the TSX-1620’s ports. Port state information includes the
selected Port Display Form information and the associated color codes.
Statistics
This polling interval controls how often the information displayed in the Port
Status boxes is updated when the Port Display Form is set to a statistical selection.
NOTE
SPMA generates network traffic when it retrieves the above-described information; keep
in mind that shorter intervals mean increased network traffic. Range limits for these
polling times are 0-999,999 seconds; however, an entry of 0 will be treated as a 1.