Cal Spas LTR20101000 manual Maintenance Schedule

30

Clear PlanWater

Maintenance Schedule

Each time you refill the spa	Follow the section “Starting the Spa with Fresh Water”.
Prior to each use	Test the spa water using either test strips a reagent test kit. Adjust
	chemical levels as necessary.
Once a week	Test the spa water using either test strips a reagent test kit. Adjust
	chemical levels as necessary.
Once a month	Deep clean your spa’s filter. (Follow filter cleaning instruction at
	beginning of Clear Water Plan)
Every two to four months	Drain and clean your spa with “Multi-Purpose Cleaner”.
	Polish the acrylic surface with “Fast Sheen”.
	Clean and treat spa cover, pillows, and Cal Select cabinet (if
	equipped) with “Cover Protector”.
	Refill your spa, following the section “Starting the Spa with Fresh
	Water”.
	If you are using the Cal Clarity Automatic Bromine Generator Clear
	Water Plan, add new sodium bromide to the water.
Once a year	Replace filter cartridges if the pleats appear frayed.
	If you use the Cal Zone Quest 2000 Ozonator, you will need to
	replace the ozone cartridge.
	If you use the Cal Pure UV water sanitizer, you will need to replace
	the UV lamp.

We recommend that your spa water be changed every 4 to 6 months. You may find the need to change your spa water more frequently with heavy use. When empty, your spa should be cleaned with a non-abrasive cleaner, such as Cal Spas™ All Surface Cleaner, and then rinsed thoroughly.

2010 Portable Spa

www.calspas.com LTR20101000, Rev. C