Cambridge SoundWorks C174RCNB user manual Getting Started

GETTING STARTED

Remove the SoundWorks Radio CD (See A) from its protective polybag and place it in your preferred location. The Radio CD’s Tone alarm sound and bass output will be reduced if the Radio is placed on a compliant, soft surface.

Connect the MW antenna (See B): To prepare the antenna (1), fold the base (2) and snap it into place (3). Position the MW antenna (4) in any out-of-the way site, preferably at least 8 inches apart from the Radio CD. Insert the MW Antenna’s miniplug into the Radio CD’s rear panel minijack marked

MW ANTENNA (5).

Rotate the MW antenna to achieve the best signal for MW stations.

Connect the power cord by inserting the SoundWorks Radio CD’s AC plug into a convenient outlet.

The AC cord is also the Radio CD’s primary FM antenna. It will function better if at least 50% or more of it’s length follows a straight line (See C). Check to make sure the FM antenna switch on the rear panel of the Radio enclosure is in the INT (internal) position (factory default).

If desired, the external FM antenna can be connected and used instead of the internal antenna (See D). Connect the external antenna to the “F”-type connector of the rear panel. Set the FM antenna switch to EXT (external) .

A.

B.

1.2.

3.4.

5.		FM ANTENNA INPUT
MIXING	AUX	MW
INPUT		ANTENNA
		EXT
RECORD		INT
	INPUT	INPUT
OUTPUT
		75 OHMS

C.

			SNOOZE/MUTE
1
	ALARM
2
1	2	3	4
5	6	7	8

D.				FM ANTENNA INPUT
	MIXING	AUX	MW
	INPUT		ANTENNA	EXT
	RECORD	INPUT	INPUT	INT
	OUTPUT
				75 OHMS

8