Operating Instructions and Parts Manual

Set-Up (Continued)

Fastener Interchange

Information

Fasteners used in the Campbell Hausfeld CHN50300 Flooring Nailer / Stapler will also work in the following brand units: Bostich, Porter Cable, Porta-nails, Primatech, Senco, Power Nail, Grip Rite, High Pro, B&C Eagle, Grizzly, and Craftsman.

Loading/Unloading The Nailer

Always connect the tool to the air supply before loading fasteners. Choose which type of fastener you want to use for you project. Additional fasteners can be found at major home centers.

Loading the Staples

1.Hold the tool firmly, press the lock and pull the magazine door (see Figure 16).

2.Place the staples straddling the top of the magazine (see Figure 17).

3.Push and lock the magazine door back in place (see Figure 18).

Loading the L-Cleats

1.Hold the tool firmly, press the lock and pull the magazine (see Figure 16).

2.Place the specified type and size of L- Cleats in the magazine from side. The head of the L-Cleats should be inserted into the notch on the fixed magazine (see Figure 19).

3.Push and lock the magazine door back in place (see Figure 18).

Press

Lock

Pull

Magazine

Figure 16 - Press the lock and pull the magazine door

Figure 18 - Push the magazine closed

Staples

Straddle

Figure 17 - Place staples straddling the top of the magazine

L-Cleat heads rest in groove

Figure 19 - The head of the L-cleat should rest on the groove of the fixed magazine

12www.chpower.com