Operating Instructions and Parts Manual

Flooring Nailer/Stapler

Description

This flooring nailer/stapler is designed for use in installing 1/2 inch to 3/4 inch thick unfinished and prefinished hardwood flooring. Caution must be used so the finish is not damaged by the tool.

Specifications

Model CHN50300

Requires: 0.7 Avg SCFM using 10 fasteners per minute at 90 psi

Air Inlet: 1/4 inch NPT

Fastener Size Range:

•1-1/2 in. to 2 in.,

16 gauge L-Cleats

•1-1/2 in. to 2 in.,

15.5 gauge 1/2 in. Crown Flooring Staples

Magazine Capacity: 110 fasteners

Weight: 10 lbs.

Length: 16-1/2 inches

Height: 23 inches

Maximum Pressure: 90 psi

Pressure Range: 70 psi to 90 psi

 

Locate model number on magazine and

 

date code on tool body. Record below:

 

Model #: _____________________________

 

Date Code: ___________________________

Figure 1 - CHN50300 Flooring Nailer/Stapler

Retain these numbers for future reference.

www.chpower.com