Operating Instructions and Parts Manual
Important Safety InformationThis manual contains information that is very important to know and understand. This information is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
IMPORTANT: Information that requires special attention.
Safety SymbolsInstructions Pertaining to a Risk of Fire, Electric Shock, or Injury to Persons
This manual contains important safety, operational and maintenance information. If you have any questions, please call
When using tools, basic precautions should always be followed, including the following:
California Proposition 65
This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive
harm.Wash hands after handling.
You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or
other masonry.This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm.Wear protective gear.
General
a.To reduce the risks of electric shock, fire, and injury to persons, read
all the instructions before using the tool. Failure to follow warnings, dangers, and cautions could result in DEATH or SERIOUS INJURY.
b.Be thoroughly familiar with the controls and the proper use of the
equipment. Follow all instructions. Contact your Campbell Hausfeld representative if you have any questions.
c.Only persons well acquainted with these rules of safe operation should be allowed to use the unit.
Do not operate or allow anyone else to operate the nailer if any warnings or warning labels are not legible.Warnings or warning labels are located
on the nailer magazine and body.
The following Safety Symbols appear throughout this manual to alert you to important safety hazards and precautions.
|
|
|
|
|
Wear Eye |
| Read Manual | Risk of | |
and Mask |
| First | Explosion | |
Protection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Risk of Falling Wear Eye | Wear Hearing | |
| Protection | Protection |
|
|
|
|
|
|
Risk of Personal
Injury
Always assume the nailer contains nails. Respect the tool as a working implement; no horseplay.Always keep others at a safe distance from
the work area in case of accidental discharge of nails. Do not point the tool toward yourself or anyone whether it contains fasteners or not.Accidental triggering of the nailer could result in death or serious personal injury.
Do not make any modifications to the tool without first obtaining written approval from Campbell Hausfeld. Do not use the nailer if any
shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or tool damage may occur.
Clean and check all air supply hoses and fittings before connecting the nailer to an air supply. Replace any damaged or worn hoses or fittings.
Tool performance or durability may be reduced.
Work Area
a.Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons.
b.Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes.
c.Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool.
www.chpower.com