Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1.Set the dial to .
2.Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON] or [ON(OSD)].
3.From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or [SD LOCKED] to match the video output you wish to use.
4.Close the menu.
When [SDI OUTPUT] is set to [ON(OSD)], will appear on the screen and
When [SDI OUTPUT] is set to [ON(OSD)]:
The
selected with the DISP. button ( 33). Markers (safety zone guide, level/grid markers, etc.) are never included in the video signal output.
The [SIGNAL SETUP] [COMP.OUT] setting is not available.
2 Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal
Use the HD/SD COMPONENT OUT terminal to monitor the video that the camcorder is recording and use the VIEWFINDER COMPONENT OUT terminal to monitor the picture on the viewfinder screen.
pen the terminal cover
INPUT
|
| Yellow |
|
|
|
| VIDEO |
| White | L | |
|
| ||
| Red |
| |
| Video Cable* (supplied) | AUDIO | |
|
| ||
| Signal flow |
| R |
SD |
|
| |
HD/SD | Green | Y | |
|
| ||
|
| Blue | Pb |
|
| Red | Pr |
|
|
|
Signal flow
* The audio signal is separate from the component video signal
When using the HD/SD COMPONENT OUT terminal, select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting option and close the menu.
80