You can activate the audio peak limiter to prevent audio distortions. When activated, the audio peak limiter will limit the amplitude of audio input signals when they exceed
You can select to synchronize the audio signal with the video signal by adding an equal amount of delay to the audio. Open the menu and select [AUDIO SETUP]. Select [MONITOR SEL.], set it to [LINE OUT] and close the menu. If you wish to monitor audio in real time, select [NORMAL] instead. With either setting, the audio and video signals recorded on the tape will be synchronized.
In 
Easy Recording mode, even if one or both 
switches are set to M, audio adjustment occurs automatically and cannot be set manually.
Embedded Audio
Embedded audio refers to the superimposing of the audio signal along with the video signal being output from the HD/SD SDI terminal.
[ON]: To embed the audio.
[ON(OSD)]: To embed the audio and
MENU | SIGNAL SETUP | SDI OUTPUT••OFF |
|
|
Open the menu and select [SIGNAL SETU ]. Select [SDI OUT UT], select a setting option and close the menu.
: The embedded audio output depends on the signal standard and the sampling frequency settings.
| Signal standard | Sampling frequency | Locked/unlocked audio | Embedded audio output |
HD | 48 kHz | Locked |
|
|
|
|
|
SD | 32 kHz (12bit) | Locked | * |
|
|
| |
48 kHz (16bit) | Locked |
| |
|
| ||
|
|
|
|
: Embedded audio output from a tape that was originally recorded with unlocked audio is not guaranteed. 
, 
3/4 or 
1/2 will appear on the screen.
Signal standard | Sampling frequency | Locked/unlocked audio | Embedded audio output | |
HD | 48 kHz | Locked |
| |
|
|
|
| |
| 32 kHz (12bit) | Locked | * | |
|
|
| ||
SD | Unlocked | – | ||
| ||||
|
|
| ||
48 kHz (16bit) | Locked |
| ||
|
| |||
|
|
| ||
| Unlocked | – | ||
|
| |||
|
|
|
|
* The sampling rate will be 48 kHz.
When [SDI OUTPUT] is set to [ON(OSD)], 
will appear on the screen and
Recording
53