Audio Recording
When recording on the tape in either HDV or DV standard, audio is recorded on two channels.
HDV The audio transfer rate is 384 kbps and the sampling frequency is 48 kHz.
DV You can record audio in
•Audio is recorded on channels 1 and 2, leaving the other channels unused.
•Audio cannot be dubbed using this camcorder.
•Audio recorded with this camcorder is locked audio except for audio recorded from an analog input, or from a digital input if you select the Unlock mode.
•
While recording, the sampling frequency of the output signal from the HD/SD SDI terminal will be 48 kHz regardless of the audio input.
SD Selecting the DV Audio Mode
MENU | AUDIO SETUP | DV AUDIO•••16bit |
|
|
Open the menu and select [AUDIO SETUP]. Select [DV AUDIO], select a setting option and close the menu.
Selecting the Microphone’s Audio Recording Mode
You can select the most appropriate setting, given your recording conditions, for recording audio with the
MENU | AUDIO SETUP |
|
| L W CUT••• FF |
| |
|
|
| ||||
|
|
|
|
| ||
|
|
|
|
| ||
| Open the menu and select |
| SETUP]. Select [LOW CUT], select a setting option | ||||
|
|
| [AUDIO | |||
[OFF]: To record audio under usual conditions.
[LC1]: To record mainly people’s voices.
[LC2]: To reduce the background sound of wind when recording outdoors in windy surroundings (for example, on a beach or close to buildings). Note that when you use this setting some
Selecting the Sensitivity of the Built-in Microphone
You can change the sensitivity of the
[NORMAL]: | To record audio under usual conditions. | ||||||||||
[HIGH]: | To record audio at a higher volume. | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording
MENU | AUDIO SETUP | MIC SENSIT.•••NORMAL |
|
|
Open the menu and select [AUDIO SETUP]. Select [MIC SENSIT.], select a setting option and close the menu.
49