Protecting Still images
You can protect important still images from accidental erasure when displaying a single image or the index screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
Protecting a Single Still Image
1.Select the still image you wish to protect.2.Press the SELECT/SET dial to open the still image operations menu.
In mode, the menu appears when you press the dial while you are reviewing a still image, or immediately after recording a still image.
3.Select [ PROTECT].4.Select [ON].To remove the protection select [OFF] instead.
5.Select [CLOSE] to close the menu.appears and now the image cannot be erased.
|
|
|
|
| PROTECT | ||
Protecting Still Images from the Index Screen |
| ||||||
MENU | CARD OPERATIONS |
|
|
|
|
| |
( | 27) |
|
|
|
|
|
|
1. | Move the zoom lever toward W. |
|
|
| |||
| Up to 6 still images appear. |
|
|
| |||
2. | Open the menu and select [CARD ERATI NS]. Select [ | ROTECT] and press | |||||
| the SELECT/SET dial. |
|
|
|
• appears on the image.
•Select additional images with the SELECT/SET dial and protect them in the same way.
4.lose the menu to return to the index screen.Card Memory a Using
123