Erasing Still images

You can erase still images one at a time or all at once.

Be careful when erasing still images. Erased still images cannot be recovered.

Erasing a still image that had a custom preset file embedded (recorded with the

[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.

Protected still images ( 123) cannot be erased.

Erasing a Single Still Image

1.Select the still image you wish to erase.2.Press the SELECT/SET dial to open the still image operations menu.

In mode, the menu appears when you press the dial while you are reviewing a still image, or immediately after recording a still image.

3.Select [ IMAGE ERASE].4.Select [ERASE].

The image is erased and the previous image appears.

5. Select [CLOSE] to close the menu.

Erasing All Images

MENU

CARD OPERATIONS

ERASE ALL IMAGES

( 27)

 

 

1. Open the menu and select [CARD ERATI NS].2.Select [ERASE ALL IMAGES].3.Select [YES] and close the menu.

All still images except the protected ones are erased.

122