Skin Detail Function

With the skin detail function you can set the camcorder to detect the characteristics of a certain color or tone. Detail in the targeted areas will be softened in order to conceal skin imperfections. Targeted areas will be identified on the screen by a zebra pattern alternating with the normal picture. On a connected monitor or computer, targeted areas will be identified by white areas alternating with the normal picture. You can adjust the hue, chroma, area and Y level as required, to determine the areas that will be detected as skin areas.

Determining the Tone to be Detected as Skin Area

MENU

CAMERA SETUP

SKIN DETAIL

HUE•••••••••••••• 0

(

27)

 

 

 

CHROMA••••••••••• 0

AREA••••••••••••• 0

LEVEL•••••••••• 0

1.Open the menu, select [CAMERA SETU ] and then select the [SKIN DETAIL] submenu.

2.Select each setting option, adjust the levels as necessary and close the menu.

• [HUE]: Adjust the hue for detection of the skin area. 13 levels (-6 to 6) are available; set [+] values to detect hues closer to green or [-] values to detect hues closer to red.

• [CHROMA]: Adjust the color saturation for detection of the skin area. 13 levels (-6 to 6) are available;

 

set higher levels to detect areas with richer colors.

• [AREA]:

Adjust the color range for detection of the skin area. 13 levels (-6 to 6) are available; set

 

higher levels to detect a wider color range.

•[Y LEVEL]: Adjust the brightness for detection of the skin area. 13 levels (-6 to 6) are available; set higher levels to detect brighter areas.

Activating the Skin Detail Function

MENU

AMERA SETUP

 

SKIN DETAIL

 

EFFECT LEVEL••OFF

 

 

(

27)

 

 

 

 

 

 

 

 

 

 

 

 

1.Open the menu and select [ AMERA SETUP]. Select the [SKIN DETAIL] submenu and then select [EFFECT LEVEL].

2.Select a setting option and close the menu.

•You can select the strength of the effect from low, middle or high.

• appears.

70