Receiving Faxes
Chapter 7 Receiving Faxes 7-3
❏FAX ONLY MODE
Use this mode if the LASER CLASS 2060P will be connected to a
separate telephone line used only for transmitting faxes. The LASER
CLASS 2060P then answers all calls, and receives all faxes
automatically.
❏ANS.MACHINE MODE
Use this mode if you plan to connect an answering machine to the
LASER CLASS 2060P to receive faxes and phone messages. The
LASER CLASS 2060P then receives incoming faxes normally, and
routes incoming phone calls to the answering machine.
Once you have decided which mode you want, set the mode as described
in “Setting the Receive Mode” on page 7-4. You can change the mode at
any time.
Setting the RX MODESet the LASER CLASS 2060P RX MODE as follows:
1. Open One-Touch Speed Dial panel, then press Data Registration.
2. Press Set.
3. Use N or M to select 4.RX SETTINGS.
4. Press Set, then use N or M to select 2.RX MODE.
Data
Registration
REGI STRA T I ON
1. DATA REGI STRATI ON
Set
D A T A R E G I S T RA T I O N
1 . U S E R S E T T I N G S
D A T A R E G I S T R A T I O N
4 . R X S E T T I N G S
Set
R X S E T T I N G S
2 . R X M O D E
07.Chapter 7.fm Page 3 Tuesday, May 29, 2001 4:46 PM