Canon 2060P manual How Drpd Responds to Calls, Tel

How DRPD Responds to Calls

When there is an incoming call, the LASER CLASS 2060P checks the incoming ring pattern and determines the type of pattern being received. The LASER CLASS 2060P may require up to 10 seconds to determine the pattern type, and during this time the LASER CLASS 2060P does not ring. After the pattern is detected, the LASER CLASS 2060P reacts according to how you registered the setting.

Your Setting	Incoming Call	Incoming Call
	From Fax	From Telephone
FAX	Receives the fax document	Answers as a fax
	without ringing.	machine.
TEL	Rings to alert you to pick	Rings to alert you to pick
	up the handset. Press	up the handset (or
	Start/Copy to receive the	extension phone) and
	fax. (manual reception)	take the telephone call.
FAX/TEL	Switches to receive mode	Rings to alert you to pick
AUTO SW	for fax transmission	up the handset (or
	signals and does not ring.	extension phone) and
		take the telephone call.

LASER CLASS 2060P Set for Automatic Switching

Between Fax and Telephone Calls

The LASER CLASS 2060P monitors all incoming calls for all the numbers with DRPD. The LASER CLASS 2060P answers the telephone for you and checks to see if the call is from another fax machine or from a person wanting to talk to you. If the call is from another fax, the LASER CLASS 2060P automatically receives the document. If the call is from a telephone, the LASER CLASS 2060P rings to alert you to pick up the phone.

No matter which number receives a call, if you hear a slow beep signifying another fax trying to send you a document, press Start/Copy to receive the document.

Receiving Faxes

Chapter 7 Receiving Faxes 7-21