Faxing Problems

Use the following tables to solve problems that can occur when sending and receiving faxes with the LASER CLASS 2060P.

Sending Faxes

Problem

Possible cause

Solution

 

 

 

Cannot send a fax?

The LASER CLASS 2060P

If you suspect this, unplug

 

may have overheated and

the LASER CLASS 2060P

 

shut itself down.

and let it cool for several

 

 

minutes. Then plug it back

 

 

in and try sending again.

Frequently Asked Questions

The LASER CLASS 2060P may not be set for the type of telephone line you have (pulse/tone).

Make sure the LASER CLASS 2060P is set for the type of telephone line you have. See page 3-12. (If you are not sure what type of line you have, contact your local telephone company.)

The document may not have been set correctly in the Automatic Document Feeder (ADF).

The one-touch or coded speed dialing number you used may not be registered.

Remove the document, stack it, and feed it into the Automatic Document Feeder (ADF) again.

Check the content of the One-Touch or Coded Speed Dialing button and make sure it was registered correctly. See Chapter 5.

The receiving fax machine may be out of paper.

The LASER CLASS 2060P may be sending another document from memory.

An error may have occurred during sending.

Call the other party and make sure they have paper in their fax machine.

Allow time for the current document to finish sending.

Print an activity report and check for an error code. See page 12-2.

Chapter 13

Frequently Asked Questions 13-29

Page 277
Image 277
Canon 2060P manual Faxing Problems, Sending Faxes