Canon 2060P manual Off

RX SETTINGS

3.INCOMING RING	When the LASER CLASS 2060P is set to FAX ONLY MODE, set whether
	the LASER CLASS 2060P rings when it receives a call.
OFF	The fax does not ring when it receives a fax.
ON	The fax rings when it receives a fax if the handset or a telephone is
	connected.
RING COUNT	Set the number of incoming rings before the LASER CLASS 2060P
	answers. 2 times (1 to 99)
4.MAN/AUTO SWITCH	Set the LASER CLASS 2060P to switch to document receive mode after
	ringing for a specified length of time in the manual receive mode.
OFF	The fax will keep ringing until someone answers the call manually with the
	handset or a connected extension telephone.
ON	F/T RING TIME	Set the length of time to elapse before the LASER
		CLASS 2060P switches to document receiving.
		15 SEC (1 to 99)
5.REMOTE RX	Receive from a remote telephone with preset setting.
ON	Remote receiving is turned on.
	REMOTE RX ID	You can dial a number code on the remote extension to
		start receiving a document.
		25 (0 to 99)
OFF	Remote receiving is turned off.
6.MEMORY RX	Select how incoming documents are to be received in the memory if the fax
	runs out of toner or paper, or the face-down output tray is full of printed
	pages.
ON	Remainder of the fax is stored in the memory and can be printed out as
	soon as your re-fill the paper cassette, change the toner cartridge, clear the
	paper jam, or pick up the printed pages from the face-down output tray.
OFF	Memory receiving is turned off. If the fax runs out of toner or recording paper
	during a document reception, or the face-down output tray is full of printed
	pages, the remainder of the document is not saved in the memory. The other
	party must re-send the document.

(Default settings are shown in bold type)

The Menu System

Chapter 15 The Menu System 15-11