Canon 2060P manual User Settings

USER SETTINGS

1.DATE & TIME	Set the date using the numeric buttons. Set the time (24-hour clock) using
	the numeric buttons.
2.UNIT TELEPHONE #	Enter your fax number using the numeric buttons. (Up to 20 digits.)
3.UNIT NAME	This is the name that appears at the top of each fax page you send (up to 24
	characters). See page 3-8.
4.TX TERMINAL ID	Print your ID (transmitting terminal ID) on each page you transmit.
TTI POSITION
	OUTSIDE IMAGE Terminal ID prints outside the image border.
	INSIDE IMAGE	Terminal ID prints inside the image border.
TELEPHONE # MARK	You can prefix your number with the abbreviations FAX or TEL in your
	sender ID.
	FAX	Prefixes the number with the abbreviation FAX.
	TEL	Prefixes the number with the abbreviation TEL.
5.SCANNING CONTRAST	Set the density of the reproduction.
LIGHTER	LIGHTER for dark originals.
STANDARD	Originals.
DARKER	DARKER for light originals.
6.OFFHOOK ALARM	Turn the offhook alarm off or on, which alerts you if the handset is not in the
	handset cradle.
ON	Offhook alarm sounds if handset or extension telephone is left off the hook.
OFF	No offhook alarm.
7.VOLUME CONTROL	Adjust the volume of the fax unit.
CALLING VOLUME	2 (1 to 3)
KEYPAD VOLUME	2 (0 to 3)
ALARM VOLUME	2 (0 to 3)
LINE MONITOR VOL.	2 (0 to 3)
8.RX CALL LEVEL	Adjust the volume of incoming calls.
STANDARD	Level of volume is standard.
HIGH	Level of volume is high.
9.TEL LINE TYPE	Set the telephone line type.
TOUCH TONE	The telephone line is set for touch-tone dialing.
ROTARY PULSE	The telephone line is set for rotary pulse dialing. If you need to dial into an
	information service that requires tone dialing, use the Tone button on the
	operation panel.

(Default settings are shown in bold type)

15-4 The Menu System Chapter 15