Placing a Card

When you want to scan a card, follow the procedure below to place the card.

1.Move the feed selection lever upward (OFF).

IMPORTANT

When scanning cards, set the feed selection lever to OFF and make sure to scan the cards one at a time.

2.Adjust the document guides to match the width of the card.

3.Place the card face down with the top edge at the bottom of the tray.

CAUTION

A card placed into the document feed tray in the portrait orientation may not be output properly because a load is placed on it during feeding. Furthermore, removing a card that has caused a feeding error may damage the card, so make sure to correctly insert the card.

Pull the lock lever and open the panel unit before removing a placed card. Inserting a finger into the scanner while the panel unit is closed may result in an injury.

Lock lever

2-8