Use the procedure below for fingerprint authentication. For details on fingerprint registration, see “Fingerprint Registration (Only Available with the ScanFront 300P)” on p.
1.Perform fingerprint authentication using the finger with the registered fingerprint.
IMPORTANT
Perform finger authentication by gently pressing the finger while slowly sweeping it at a constant speed to scan the fingerprint.
2.The Home screen (or Job Button screen) appears if the fingerprint is authenticated correctly.
Hint
•When fingerprint authentication fails, the cause of the failure and a solution appear on the screen. Follow the instructions in the solution, and perform fingerprint authentication again.
•If a user fingerprint is registered for server authentication, and the user password is changed on the server while the user is logged in via fingerprint authentication, the following message will appear on the screen. In this case, without using fingerprint authentication, enter your user name and changed password to log in, and then
3
Procedures Operating