4. Screen Displayed after Login

You can set the screen (Home screen or Job Button screen) that is displayed after a user logs in. (See p. 4-4.)

❏ Home Screen

❏ Job Button Screen

a

bc

aSelect destination (E-mail, FTP, FAX, Shared folder, USB memory, and Printer) buttons

These buttons open an address selection screen. (See “Scanning Procedures” on p. 3-13.)

Hint

•The USB memory button is enabled when USB memory is inserted in a USB port.

•[Printer] is enabled when the ScanFront is connected to a network environment that is running ScanFront Service.

b[User settings] button

Enables setting of the user password and fingerprint registration (only with the ScanFront 300P). (See “User Settings Screen” on p. 3-9.)

c[Administrator setting] button

Opens the Administrator Settings screen.

IMPORTANT

If a user whose use of the Home screen is restricted logs in, the Home screen is not available. For details, contact the administrator.

This screen enables you to select a job button to scan using the conditions registered to the job button, and then send the image file. (See “Scanning Procedures” on p. 3-13.)

IMPORTANT

•The document is scanned immediately after you press the job button. Make sure to place your document before you press the job button. (See “Placing Documents” on p. 2-6.)

•Perform job button registration and editing via the Web menu.

•If you are unable to edit a job button, the editing of job buttons has been restricted by the ScanFront administrator. For details, contact the administrator.

3-8