9. Scan/Delivery Options

This section describes the scan settings and send settings for the scanner.

c

g [Default] button

Resets any modified settings to the default values of the

scanner.

a

b

e

d

IMPORTANT

If you press [Default] in the Scan/Delivery Options screen opened from a job button, the settings are reset not to the setting values registered to the job button, but to the default values of the scanner.

3

i j

fg

kh

aAddress Display Area

Displays the selection that you made on the address selection screen or the addresses registered to the job button.

bDetails

Displays detailed information for the address with the colored background.

cScan Settings

Sets the scan conditions. (See “Scan Settings” on p. 3-28.)

dDetailed settings

Configures detailed settings for scan conditions. (See “Detailed Settings” on p. 3-29.)

eFile format

Checks the displayed file format and press the [File format] button to configure the settings. (See “File Formats” on p. 3-32.)

fDelivery Options

Sets the send conditions. (See “Delivery Options” on p. 3-34.)

h[Start] button

Starts scanning.

i[Deskew] button

The scanner detects from the scanned image that the document was fed askew and then straightens the image.

j[Prescan] button

When scanning starts, the first page of the document is scanned and then scanning stops. You can view the image of the first page to check and adjust the brightness and contrast before scanning the entire document.

Hint

•Scanning pauses after the first page of the document is scanned, and the image of the first page is displayed.

•Use the displayed image to confirm and adjust the brightness and contrast. Press [Continue] to confirm the adjusted brightness and contrast for the first image and continue scanning.

k[Back] button

Returns the display to the previous screen.

Procedures Operating

3-27