3Customizing AF FunctionsN

25

Manual AF point selection pattern

During manual AF point selection, the selection can either stop at the outer edge or it can move to the opposite AF point. This function works in AF area selection modes other than 61-point automatic selection AF and Zone AF. (It works in 61-point automatic selection AF only with AI Servo AF.)

: Stops at AF area edges

Convenient if you often use an AF point along the edge.

: Continuous

Instead of stopping at the outer edge, the selected AF point continues to the opposite side.

AF point display during focus

You can set whether or not to display the AF point(s) in the following cases: 1. When selecting the AF point(s), 2. When the camera is ready to shoot (before AF operation), 3. During AF operation, and 4. When focus is achieved.

: Selected (constant)

The selected AF point(s) is always displayed.

: All (constant)

All 61 AF points are always displayed.

: Selected (pre-AF, focused)

The selected AF point(s) is displayed for 1, 2, and 4.

: Selected (focused)

The selected AF point(s) is displayed for 1 and 4.

OFF: Disable display

For 2, 3, and 4, the selected AF point(s) will not be displayed.

102