Displaying the Grid and Electronic Level
Displaying the Electronic Level on the LCD Monitor
1 Press the <B> button.
Each time you press the <B>
button, the screen display will change.
Display the electronic level.
If the electronic level does not appear, set [53: zbutton display options] so that the electronic level can be displayed (p.336).
2
Vertical level Horizontal level
Check the camera’s tilt.
The horizontal and vertical tilt are displayed in 1° increments. When the red line turns green, it indicates that the tilt is corrected.
Even when the tilt is corrected, there may be a margin of error of ±1°.
If the camera is very tilted, the electronic level’s margin of error will be bigger.
With this same procedure, you can display the electronic level during Live View shooting and before shooting a movie (p.200, 225). Note that the electronic level cannot be displayed during movie shooting. (The electronic level will disappear when you start shooting a movie.)
60