3Setting the Image-Recording Quality

You can select the pixel count and the image quality. There are eight JPEG image-recording quality settings: 73, 83, 74, 84, 7a,

8a, b, c. There are three RAW image quality settings: 1, 41,

61(p.122).

With [Standard / Auto switch card / Rec. to multiple] set:

With [Rec. separately] set:

1 Select [Image quality].

Under the [z1] tab, select [Image quality], then press <0>.

2Select the image-recording quality.

To select a RAW setting, turn the

<6> dial. To select a JPEG setting, turn the <5> dial.

On the upper right, the “**M (megapixels) **** x ****” number indicates the recorded pixel count, and [***] is the number of possible shots (displayed up to 9999). Press <0> to set it.

Under [51: Record func+card/ folder sel.], if [Record func.] is set to [Rec. separately], turn the <5> dial to select <f> or <g>, then press <0>.

On the screen that appears, turn the <5> dial to select the image- recording quality, then press <0>.

119