dTransferring Images to a Personal Computer

3Select the Images to be Transferred

Sel.Image

1 Select [Image transfer].

Under the [32] tab, select [Image transfer], then press <0>.

2 Select [Image sel./transfer]. Select [Image sel./transfer], then press <0>.

3 Select [Sel.Image].

Select [Sel.Image], then press <0>.

4 Select the images to be transferred.

Turn the <5> dial to select the image to be transferred, then press <0>. Turn the <5> dial to display the <X> on the screen’s upper left, then press <0>. If you press the <u> button and turn the <6> dial counterclockwise, you can select an image from a three-image display. To return to the single- image display, turn the <6> dial clockwise. To select other images to be transferred, repeat step 4.

To return to the screen in step 3, press the <M> button.

When [Sel.Image] is selected, you can check the image’s transfer status on the upper left of the screen: No mark: Not selected. X: Selected for transfer. l: Transfer failed. k: Transfer succeeded.

On page 310, the procedures for [RAW+JPEG transfer] and steps 1 to 4 can also be performed while the camera is not connected to a personal computer.

311