SSelecting the AF AreaN
Selecting the AF Point Manually
You can manually select the AF point or zone. With
1 Press the <S> button.
X The AF points will be displayed in the
viewfinder.
In AF point expansion modes, effective adjacent AF points will also be displayed. In the Zone AF mode, the selected zone will be displayed.
2 Select an AF point.
The AF point selection will change in the direction you tilt the <9>. If you press <9> straight down, the center AF point (or center Zone) will be selected.
The <6> dial selects an AF point in the horizontal direction, and the <5> dial selects an AF point in the vertical direction. In the Zone AF mode, turning the <6> or <5> dial will change the Zone in a looping sequence.
AF Point Display Indications
Pressing the <S> button lights up the AF points that are
When you press the <S> button, the LCD panel displays the following:
•
zone): AF
•
With [25: Manual AF pt. selec. pattern], you can set either [Stops at AF area edges] or [Continuous] (p.102).
74