3Setting the Sound Recording
Using the microphone
The
mm)to the camera’s external microphone IN terminal (p.19). When an external microphone is connected, sound recording will switch automatically to the external microphone.
Using headphones
By connecting stereo headphones (commercially available) equipped with a 3.5 mm mini plug to the camera’s headphone terminal (p.19), you can listen to the sound during movie shooting. If you are using an external stereo microphone, you can listen to the sound in stereo.
You can also use headphones during movie playback.
The audio output to the headphones will not have noise reduction applied. It will therefore be different from the sound recorded with the movie.
In the <A> shooting mode, [Sound recording] settings will be [On/Off]. If [On] is set, the
To adjust the headphones’ volume, press the <Q> button, then tilt the
The sound volume balance between L (left) and R (right) cannot be adjusted.
The 48 kHz sampling frequency will be
If [z5: Silent Control] is set to [Enable h] (p.236), you can adjust the
235