Canon iR6570 manual a b c d e g f, If a paper jam occurs inside the main unit

1 Inspect all paper jam locations indicated on the touch panel display, and remove any jammed paper.

See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can follow the instructions on the touch panel display.

If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside the machine.

IMPORTANT

•If the machine's power is turned OFF when there is a paper jam, detection of paper jams in the paper drawers is not possible after the power is turned back ON. Clear paper jams without turning the power OFF.

•If a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the directions on the touch panel display to clear the paper jam. (See "Feeder," in the Reference Guide.)

•If the MEAP screen is displayed, a message appears in the Job/Print monitor area. Press [System Monitor], and follow the procedures that appear on the touch panel display to help you remove the jammed paper.

3

●If a paper jam occurs inside the main unit:

❑See the instructions on the following section.

aFeeder (See "Feeder," in the Reference Guide.)

bMain Unit (Fixing Unit and Duplexing Unit) (See "Main Unit (Fixing Unit and Duplexing Unit)," in the Reference Guide.)

cStack Bypass (See "Stack Bypass," in the Reference Guide.)

dRight Cover (See "Inside the Upper and Lower Right Covers," in the Reference Guide.)

a b c d e

g f

Troubleshooting

ePaper Drawers 3 and 4 (See "Paper Drawers 3 and 4," in the Reference Guide.)

fPaper Drawer 1 (See "Paper Drawer 1," in the Reference Guide.)

gPaper Drawer 2 (See "Paper Drawer 2," in the Reference Guide.)

NOTE

Some areas that are shown to have paper jams may not actually have paper jams. However, always check all locations indicated on the touch panel display in the order that is given.

Clearing Paper Jams 3-3