Canon iR6570 manual Avoid exposing the machine to rapid changes in temperature, equipment

1

Before You Start Using This Machine

■Avoid exposing the machine to rapid

changes in temperature.

If the room in which the machine is installed is cold but rapidly heated, water droplets (condensation) may form inside the machine. This may result in a noticeable degradation in the quality of the copied image, the inability to properly scan an original, or the copies having no printed image at all.

■Avoid installing the machine near computers or other precision electronic

equipment.

Electrical interference and vibrations generated by the machine during printing can adversely affect the operation of such equipment.

■Avoid installing the machine near televisions, radios, or similar electronic

equipment.

The machine might interfere with sound and picture signal reception. Insert the power plug into a dedicated power outlet, and maintain as much space as possible between the machine and other electronic equipment.

■Do not remove the machine's leveling feet.

Do not remove the machine's leveling feet after the machine has been installed. If you put weight on the front of the machine while the drawers or units within the machine are pulled out, the machine may fall forward. To prevent this from happening, make sure that the machine's leveling feet are in place.

1-4Installation Location and Handling