Flash
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on the flash range, see “Flash Range” (=204).
1Raise the flash. zzMove the <h> switch.
2Configure the setting.
zzPress the <r> button, press the <q><r> buttons to choose a flash mode, and then press the <m> button.
zzThe option you configured is now displayed.
•The setting screen cannot be accessed by pressing the <r> button
when the flash is lowered. Move the <h> switch to raise the flash, then configure the setting.
[ ] Auto
Fires automatically in
[h] On
Fires for each shot.
[Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.
•In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (=85).
•In [Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.
[!] Off
For shooting without the flash.
•If a blinking [] icon is displayed when you press the shutter button
halfway in
• Adjustment is also possible by pressing the <r> button, touching the desired option, and then touching it again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
PMode Playback Mode
83