Still Images | Movies |
Changing the IS Mode Settings1Access the setting screen. zzPress the <n> button, choose [IS
Settings] on the [4] tab, and then press the <m> button (=26).
2 Configure the setting.
| zzChoose [IS Mode], and then choose the | |
| desired option (=26). | |
|
| |
Continuous | Optimal image stabilization for the shooting conditions is automatically | |
applied (Intelligent IS) (=35). | ||
| ||
Shoot Only* | Image stabilization is active only at the moment of shooting. | |
Off | Deactivates image stabilization. |
* The setting is changed to [Continuous] for movie recording.
•If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
Movies
Shooting Movies with Subjects at the Same Size Shown before Shooting
Normally, once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, you can choose not to reduce significant camera shake.
zzFollow the steps in “Changing the IS Mode Settings” (=85) to access the [IS Settings] screen.
zzChoose [Dynamic IS], and then choose [2] (=26).
• You can also set [IS Mode] to [Off], so that subjects are recorded at the same size shown before shooting.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
PMode Playback Mode
85