Using the <> Button
Once you have registered a smartphone or Image Sync (=145) to the <> button, you can connect to the registered destination simply by pressing the <> button.
Registering a Smartphone to the <> Button
Once you have connected to a smartphone initially via
1 Press the <> button.
2Choose the destination.
zzPress the <q><r> buttons to choose [], and then press the <m> button.
3Establish the connection.
zzConnect to the smartphone as described in steps 5 – 9 in “Connecting to WPS- Compatible Access Points” (=130) or steps 4 – 6 in “Connecting without an Access Point” (=135).
zzAfter a connection is established with the smartphone, the smartphone nickname is displayed on the camera. (This screen will close in about one minute.)
zzYou can now use the smartphone to import images from the camera. (The camera cannot be used to send images to the smartphone.)
zzUse the smartphone to end the connection; the camera will automatically turn off.
zzFrom now on, you can simply press the <> button to connect to the registered smartphone.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
PMode Playback Mode
143