2Aim the camera at a person. zzEach time the camera detects a smile, it
will shoot after the lamp lights up.
zzTo pause smile detection, press the <q> button. Press the <q> button again to resume detection.
No. of Shots, Mode Switching (=67, 68)
•Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and open their mouth wide enough so that teeth are visible.
•To change the number of shots, press the <o><p> buttons after choosing [] in step 1. [Blink Detection] (=51) is only available for the final shot.
• You can also choose the shooting mode by choosing [] in steps 1 – 2 of
“Specific Scenes” (=60), touching [] to access the setting screen,
touching [], and then touching the same option or [].
Still Images
Using the Wink
Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.
1Choose [].
zzFollow steps 1 – 2 in “Specific Scenes” (=60) and choose [], and then press the <p> button.
zzPress the <q><r> buttons to choose [], and then press the <m> button.
2Compose the shot and press the shutter button halfway.
zzOn the screen, touch the face of the person who will wink to choose it (Touch AF), and then press the shutter button halfway.
zzMake sure a green frame is displayed around the face of the person who will wink.
3Press the shutter button all the way down.
zzThe camera now enters shooting standby mode, and [Wink to take picture] is displayed.
zzThe lamp blinks and the
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
PMode Playback Mode
67