Choosing Images Individually
1Choose [Select].
zzFollowing step 2 in “Choosing a Selection Method” (=101), choose [Select] and press the <m> button.
2Choose an image.
zzOnce you choose an image following step 2 in “Choosing Images Individually” (=98), [] is displayed.
zzTo cancel selection, press the <m> button again. [] is no longer displayed.
zzRepeat this process to specify other images.
3Erase the image.
zzPress the <n> button. A confirmation message is displayed.
zzPress the <q><r> buttons to choose [OK], and then press the <m> button.
Selecting a Range
1Choose [Select Range].
zzFollowing step 2 in “Choosing a Selection Method” (=101), choose [Select Range] and press the <m> button.
2Choose images.
zzFollow steps 2 – 3 in “Selecting a Range” (=99) to specify images.
3Erase the images.
zzPress the <p> button to choose [Erase], and then press the <m> button.
Specifying All Images at Once
1Choose [Select All Images]. zzFollowing step 2 in “Choosing a Selection
Method” (=101), choose [Select All
Images] and press the <m> button.
2Erase the images.
zzPress the <q><r> buttons to choose [OK], and then press the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Hybrid Auto /
Dual Capture Mode
Other Shooting
Modes
PMode Playback Mode
102