91
● Printing ●
2Trim the image.
• Changing the Size of the Trimming Frame
• Press the or the button.
• The trimming frame can be changed to a
minimum selection of approximately half the
displayed image or a maximum selection that
is virtually the same size as the image.
• You can cancel the trimming setting by
pressing the again when the trimming
frame is already set to the maximum size.
• When printing an image that has been
magnified using the trimming option, the
image quality may become coarser and
grainier depending on the magnifying rate.
With direct print function compatible printers
(CP Series), the trimming frame displays in
red.
• Setting the Position of the Trimming Frame.
• Use to position the trimming
frame.
• Rotating the Trimming Frame
• You can rotate the trimming frame by
pressing the DISP. button.
3 Press the SET button.
The trimming setting only applies to one image
The trimming setting is cancelled with the following
operations.
•Pressing the MENU button.
•When you set the trimming of another image.
•When you close the Print mode. (i.e. turn the
camera off, change the camera mode, or
disconnect the Direct Interface cable)
•When you press while th e trimming frame is at
its maximum size.