Start your | ❍ Use the printer driver to set any necessary print |
print operation. | properties; for example, you need to change the settings |
| in the printer driver if you are printing photos or using |
| special paper. |
Auto Feed Guidelines
When automatically feeding stacks of paper, follow these guidelines:
❍Do not open the front cover while printing. This may cause paper jams, smudges, or malfunctions.
❍Do not leave paper stacked in the printer for long periods of time; longer sheets of paper may become bent or curled over time. This may cause the paper to misfeed or jam.
❍Depending on the density of your printed pages, the ink may need time to dry. Within two to three seconds, the ink becomes smudge resistant.
❍If your printed page contains lots of graphics, the ink may take longer to dry.
❍The capacity of the paper output tray is 20 sheets of paper. To reduce paper jams, remove paper from the output tray before the count reaches 20.
❍If paper curls after printing, remove it immediately; otherwise, paper jams may occur.
❍Make sure there are no gaps between the stack of paper and the paper guide nor the right edge of the sheet feeder.
Chapter 3 |