Canon CR-2 on the rating label, not support data CD-ROMs, the patient simultaneously, Insert the power plug completely, around the plug and the AC outlet

2 Safety

WARNING		Do not use a power supply voltage other than that specified
		on the rating label.
	Prohibited	Do not use any power cord other than the one supplied.
		Use the power voltage specified on the rating label. Otherwise, fire or electric shock
		may result.
		The supplied power cord is designed exclusively for this product. Do not use any
		other power cord.
		Do not plug or unplug the power plug with wet hands.
	Prohibited	Do not plug or unplug the power plug or handle any other parts with wet hands.
		Otherwise, fire or electric shock may result.
		Unplug the plug periodically and remove any dust or dirt
		around the plug and the AC outlet.
		If the cord is kept plugged in for a long time in a dusty, humid or sooty environment,
		dust around the plug will attract moisture, resulting in possible insulation failure that
		may result in a fire.
		Insert the power plug completely.
		Insert the power plug completely into the AC outlet. If a pin of the power plug makes
		contact with metal or any conductive object, fire or electric shock may result.
		Do not clean the CR-2 with flammable solvent.
	Prohibited	For safety reasons, before cleaning the CR-2, be sure to turn off the power of all the
		devices and unplug the power cord from the AC outlet. Do not use alcohol, benzine,
		thinner or any other flammable solvent.
		Otherwise, fire or electric shock may result.
		Turn off the power before inspection.
		For safety reasons, before inspecting the instrument or cables, be sure to turn off
		the power of all the devices.
		Otherwise, electric shock may result.
		Do not play the supplied CD-ROM in any CD player that does
		not support data CD-ROMs.
	Prohibited	Playing the CD-ROM in an audio CD player may damage the speaker. Playing the
		CD-ROM in an audio CD player may also cause hearing loss if listened to with
		headphones.
		Be sure to turn off the power before moving the CR-2.
		Before moving the CR-2, make sure that the power is turned off, the power
		plug is removed from the AC outlet, and any cables that are connected to other
		devices are disconnected.
		Do not touch conductive parts of non-medical equipment and
		the patient simultaneously.
	Prohibited	Otherwise, electric shock may result.

Use an isolation transformer when this system is connected to a network.

Connect an isolation transformer conforming to IEC 60601-1 for networks between the computer and HUB.

Otherwise, there is a risk of electric shock if the network is faulty.

10