2 Safety

Safety Precautions

To prevent injuries and data loss, operate the CR-2 correctly by following the safety precautions.

WARNING

 

To avoid the risk of electric shock, this equipment must only

 

be connected to a supply mains with protective earth.

 

 

 

 

 

 

 

Do not damage the power cord.

 

Prohibited

Do not place anything heavy onto the power cord.

 

Do not damage or modify the power cord.

 

 

 

 

Do not forcibly bend, twist or pull the power cord.

 

 

Do not hold the power cord when removing it from the AC outlet. Be sure to hold

 

 

the plug.

 

 

Handle the power cord carefully. If the cord is damaged, contact your sales

 

 

representative or local Canon dealer. A damaged cord may result in fire or electric

 

 

shock.

 

 

 

 

 

Do not use a multiple power strip and an extension cable.

 

Prohibited

Connect the power cord directly to the AC outlet. Do not use a multiple power strip

 

and an extension cable with it.

 

 

 

 

 

 

 

Do not disassemble or modify.

 

Prohibited

A disassembled or modified instrument may result in fire or electric shock. Because

 

the CR-2 incorporates high-voltage parts that may cause electric shocks, touching

 

 

 

 

them may cause death or serious injury.

 

 

 

 

 

Do not leave alcohol, thinner, or any flammable chemicals

 

 

near the instrument.

 

Prohibited

Do not place the CR-2 near a flammable solvent. Fire may result if the solvent spills

 

 

 

 

or evaporates and makes contact with the internal electric parts. Some disinfectants

 

 

are flammable. Be sure to take precautions when using them.

 

 

 

 

 

Stop using immediately if there is an abnormality or problem.

 

 

If an abnormality occurs, immediately turn off the power and

 

 

disconnect the plugs on all devices.

 

 

Smoke is emitted

 

 

An unusual smell

 

 

An unusual noise

 

 

Foreign matter gets inside

 

 

Devices are damaged.

 

 

Fire or electric shock may result if you continue using in such conditions.

 

 

Immediately turn off the power of CR-2, unplug the power plug and turn off the

 

 

power of all connected devices. Then, contact your sales representative or local

 

 

Canon dealer immediately.

 

 

 

 

 

Do not place anything on top of the device.

 

Prohibited

Fire or electric shock may result if water or any other liquid or a needle, paper clip or

 

any foreign matter gets inside the CR-2.

 

 

 

 

 

9