Canon CR-2 Guidance and Manufacturer’s Declaration for Electromagnetic Emission

Appendix

Guidance and Manufacturer’s Declaration for Electromagnetic Emission

The CR-2 is intended for use in the electromagnetic environment specified below.

The customer or the user of the CR-2 should assure that it is used in such an environment.

Emission Test	Compliance	Electromagnetic Environment – Guidance
RF emissions		The CR-2 uses RF energy only for its internal
		function. Therefore, its RF emissions are very low
EN 55011	Group 1
		and are not likely to cause any interference in nearby
CISPR11
		electromagnetic equipment.
RF emissions
EN 55011	Class B	The CR-2 is suitable for use in all establishments,
CISPR11
		including domestic establishments and those directly
Harmonic emissions	Class A
		connected to the public low-voltage power supply
EN IEC 61000-3-2
		network that supplies buildings used for domestic
Voltage fluctuations/flicker
		purposes.
emissions	Complies
EN IEC 61000-3-3*

* Not applicable to regions where the rated voltage is less than 220 V.

44