Canon CR-2 gas, CR-2, or dust, vibration, Do not block the vent holes, Do not place anything near the power plug, Ensure that the entire system conforms to IEC

2 Safety

CAUTION		Do not install in locations exposed to water, steam, moisture
		or dust.
	Prohibited	Doing so may cause problems or malfunctions.
		Do not install in locations exposed to salt, sulfur or corrosive
		gas.
	Prohibited	Doing so may result in corrosion of the instrument, problems or malfunctions.
		Do not install in locations that are unstable or exposed to
		vibration.
	Prohibited	The vibration may knock over the instrument or the instrument may become
		unbalanced and fall, resulting in a malfunction or injury.
		Do not place anything near the power plug.
	Prohibited	To make it easy to unplug the power plug at any time, avoid putting any obstructions
		near the AC outlet.
		Fire or electric shock may result if the power plug is not unplugged during an
		emergency.
		Do not block the vent holes.
	Prohibited	Doing so may cause the internal temperature to rise and result in fire.
		Do not place your hands or fingers on the base.
	Prohibited	Your hand or fingers may be pinched and injured when the stage moves to either
		side.
		Similarly, instruct the patient not to place his/her hands or fingers on the base.
		Do not hold the head rest or digital camera when moving the
		CR-2.
	Prohibited	When carrying the CR-2, be sure to tighten the stage lock, hold the carrying
		indentations at the front and rear of the base panel, and keep the CR-2 level. Do not
		hold it by the digital camera or the head rest or any other parts, as they may come
		off and result in injury.
		Hold the CR-2 when connecting or disconnecting a cable.
		For safety reasons, when connecting or disconnecting the power cord or any cable,
		be sure to hold the main unit. Otherwise, the main unit may fall over, possibly
		causing injury.
		Ensure that the entire system conforms to IEC 60601-1-1.
		Use the computer, monitor, and other equipment that conform to the system
		standard IEC 60601-1 or IEC 60950-1 for the Digital Retinal Camera CR-2. Be sure
		that the entire system conforms to IEC 60601-1-1. Be sure to also use an isolation
		transformer conforming to IEC 60601-1 when a computer or monitor conforming to
		IEC 60950-1 is used.
		Otherwise, electric shock may occur. For details, please contact your sales
		representative or local Canon dealer.

11