Canon CR-2 33

5 Photography Auxiliary Functions

Remove the digital camera cover.

Connect the HDMI cable to the digital camera.

1.Securely insert the HDMI cable into the HDMI mini output terminal on the digital camera.

2.Fit the HDMI cable into the space in the cover, and place the cable in the notch.

Notch

3Attach the digital camera cover.

1.Hook the digital camera cover hook onto the strap mount of the digital camera.

2.While taking care to avoid pinching the HDMI cable, insert the cover screw to secure the digital camera cover.

Cover screw

Connect the HDMI cable to the external monitor.

Connect the HDMI cable to the HDMI input terminal on the external monitor.

Turn on the power to the retinal camera and the digital camera.

The image is displayed on the external observation monitor. No image is displayed on the observation monitor of the retinal camera.

Contents

Digital Retinal Camera Operation Manual Important Disclaimers Installation Trademarks Copyright Contents 1Introduction Features Indications for Use Checking Included Items Conventions Used in This Manual 2Safety Regulatory Information European Union Deutschland Safety Precautions Do not use a power supply voltage other than that specified on the rating label Do not use any power cord other than the one supplied Do not plug or unplug the power plug with wet hands Unplug the plug periodically and remove any dust or dirt Do not install in locations exposed to water, steam, moisture or dust Do not install in locations exposed to salt, sulfur or corrosive gas Do not install in locations that are unstable or exposed to Keep the forehead rest and chin rest clean Slowly move the main unit towards the patient’s eye when taking an image Check the image before using the CR-2 Be sure to turn off the power when not in use Do not touch the main unit or the chin rest while they are moving Notes on Using CR-2 Environment of use Transportation Disposal European Union (and EEA*) only Rating Label Display 3Names of Parts Retinal Camera Page Operation Panel Observation Monitor 4Basic Operations Flow of Operation Connecting Cables Preparing for an Examination Page Patient Setup Alignment Page Page Photography Finishing an Examination 5Photography Auxiliary Functions x2 Photography Small Pupil Photography Function Diopter Compensation Anterior Segment Photography External Monitor Page 6Maintenance Daily Inspections Cleaning the Objective Lens Cleaning the Image Sensor Cleaning the Outside of the CR-2 Disinfecting the Forehead Rest Refilling Chin Rest Paper Attaching and Removing the Digital Camera Removing the digital camera Installing the digital camera 7Troubleshooting Page Appendix Specifications EMC (Electromagnetic Compatibility) Guidance and Manufacturer’s Declaration for Electromagnetic Emission Guidance and Manufacturer’s Declaration for Electromagnetic Immunity Page Recommended Separation Distances between Portable and Mobile RF Communications Equipment and Devices or the CR-2 Warranty and Repair Service