Windows 2000 Plug and Play | Canon D300 specification

■Windows 2000 Plug and Play

The following is the installation procedure of Plug and Play, under Windows 2000. Before you install the software, make sure you do the following:

•Connect the machine to your computer ( Setup Sheet).

•Turn on the machine ( Setup Sheet).

•Start up Windows 2000.

1	Log on as member of Administrators. The full control access right for the printer is necessary
	for the installation of CARPS.
2	Plug and Play is being carried out and the USB class driver, USB Printing Support, is
	automatically detected and installed.
3	The Found New Hardware Wizard dialog box appears. Click Next.
	Select Search for a suitable driver for my device (recommended) in the Found New
	Hardware Wizard dialog box click Next.
	“Unknown” may be displayed as the name of the device.
	NOTE

2-20