Canon DC220, DC50, DC230 Removing the Disc, Grab the edge of the disc and gently pull it out

•The disc initialization will take

approximately one minute. Avoid moving the camcorder while the operation is in progress.

•You can start recording movies once

the record pause indication appears.

NOTES

The process of recognizing a disc may take a

moment. The display will move while the disc is being read. Wait until the camcorder finishes recognizing the disc before you start recording.

Getting Started 27

IMPORTANT

When you slide OPEN after making a recording, important file allocation data is updated on the disc before the disc cover opens. While the DISC access indicator is on or flashing do not subject the camcorder to shocks such as forcefully laying it on a table.

Removing the Disc

1Slide OPEN fully in the direction of the arrow and gently open the disc cover completely until it stops.

•Do not subject the camcorder to strong impacts while the DISC access indicator is on or flashing.

•Retract the grip belt under the camcorder so it will not get in the way of the disc cover.

•It may take a moment after sliding OPEN for the disc cover to open.

2Grab the edge of the disc and gently pull it out.

Be careful not to touch the recording surface of the disc or the pick up lens.

3Close the disc cover.

Preparations