Canon DC230, DC220, DC50 instruction manual System Setup, High Volume, RESET, Continuous

50Menu Options Lists

SYSTEM SETUP

MEDIA SEL. ( 37)

[ CARD], [ DISC]

WL.REMOTE

[ ON], [ OFF ]

Allows the camcorder to be operated with the wireless controller.

VOLUME ( 40)

BEEP

[ HIGH VOLUME],

[ LOW VOLUME], [ OFF]

A beep will accompany some operations like turning on the camcorder, the self- timer countdown, etc. It also serves as a warning beep under unusual conditions.

POWER SAVE

[ ON], [ OFF]

In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes.

Approximately 30 seconds before the camcorder shuts off, the message

“ AUTO POWER OFF” will appear. In Quick-Start ready mode, the camcorder will shut off after the time selected for the [ STANDBY OFF]

setting.

STANDBY OFF ( 38)

[ 10 min], [ 20 min],

[ 30 min]

Select the length of time after which the camcorder will end the Quick-Start ready mode and shut off automatically.

FILE NOS.

[ RESET], [ CONTINUOUS]

Select the image numbering method to be used on a new memory card or disc. Images are automatically assigned consecutive image numbers from 0101 to 9900, and stored in folders containing up to 100 images. Folders are numbered from 101 to 998.

[ RESET]: Image numbers will restart from 101-0101 every time you insert a new memory card or disc.

[ CONTINUOUS]: Image numbers will continue from the number following that of the last image recorded with the camcorder.

If the recording media you insert already contains an image with a larger number, a new image will be assigned a number one higher than that of the last image on the memory card or disc.

We recommend using the [ CONTINUOUS] setting.

The setting is common to the memory card and the disc.