Canon DC50, DC220, DC230 Lithium Button Battery, Built-in Rechargeable Lithium Battery

Do’s and Don’ts 109

memory card, for example by physically damaging it to prevent the leakage of private data.

Lithium Button Battery

WARNING!

•The battery used in this device may present a fire or chemical burn hazard if mishandled. Do not recharge, disassemble, heat above 100 °C (212 °F) or incinerate the battery.

•Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo, or with Duracell2025. Use of other batteries may present a risk of fire or explosion.

•Dispose of the used battery according to applicable recycling regulations.

Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit.

Wipe the battery with a clean dry cloth to ensure proper contact.

Keep the battery out of the reach of children. If swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may cause internal damage.

Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.

For California, USA only: The lithium battery included contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate for details.

Built-in Rechargeable Lithium Battery

The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder, however, it will become totally discharged if you do not use the camcorder for about 3 months.

To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the power switch set to

.

Additional Information