Playback

Basic Functions
41
Depending on the recording, you might
occasionally notice a brief stop of the picture or
sound at the point where the scene changes.

Displaying the Photos

1Move the power switch to ON, then
slide it down toward MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2Move the / switch to the
(Still images) position.
3If necessary, change the media for
the still images.
Refer to Selecting the Media for the
Photos ( 37).
4Use the joystick ( ) to move
between images.
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Avoid the following actions while the disc/card
access display ( or ) appears on
screen, and when either the DISC access or
CARD access indicator is on or flashing. Failing
to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover or the memory
card slot cover and do not remove the disc or
memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the /
switch or the operating mode.

Slideshow

1Press .
2Select ( ) [ SLIDESHOW] and
press ( ).
3Select ( ) [START] and press
().
• Images are played back one after
another.
• Press to stop the slideshow.

Index Screen

1Move the zoom lever toward W.
The still images index screen appears.
2Select ( , ) an image.
( 12)
SLIDESHOW
FUNC.
(31)
FUNC.
FUNC.
D119_NTSC-E.book Page 41 Monday, December 18, 2006 10:14 AM