Canon DC220, DC50, DC230 Remaining recording time, Recording reminder, Card/Disc access display

Disc operation
Record,	Record pause,
Playback,	Playback pause,

Fast playback,

Fast reverse playback,

Slow playback,

Slow reverse playback

Remaining recording time

When there is no more disc space available, “ END” will be displayed and the recording will stop.

Recording reminder

The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short.

Getting to Know the Camcorder 21

Number of still images available on the card/disc

flashing in red: No card

in green: 6 or more images

in yellow: 1 to 5 images

in red: No more images can be recorded

•When viewing the still images, the display will always be in green.

• will be displayed instead of for still images on the disc.

•Depending on the recording conditions, the number of available still images displayed may not decrease even after a recording has been made, or may decrease by 2 still images at once.

Card/Disc access display

“ ” is displayed next to the number of images available while the camcorder is writing on the memory card or disc.

Remaining battery charge estimate

•When “” starts flashing in red replace the battery pack with a fully charged one.

•When you attach an empty battery pack, the power may turn off without displaying “”.

•Depending on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately.

Introduction